Release Information:

Release date: July 24th, 2013. 
Category: Latest Official Release

Main Version: BDP10X-58-0719
Loader Version: 6U0900 or 7B1200 (BDP-103AU), 7B1200 (BDP-105AU)
Sub Version: MCU103-05-0916 (BDP-103AU), MCU105-04-1113 (BDP-105AU)

How to Get the Firmware Upgrade:

There are three easy ways to upgrade your player's firmware.

If your player has an Internet connection:
1. Via Network - This is the easiest and fastest way.

If your player does not have an Internet connection:
2. USB Thumb Drive - Use your computer and a USB thumb drive.
3. Firmware Upgrade Disc - Use your computer to make a firmware upgrade disc.


If you are unable to perform one of the above methods, you can submit a request for a firmware upgrade disc which can be sent to you.

Warning: Although firmware upgrade is an easy and usually trouble-free process, it is important to ensure that the power supply to the player is stable, and the upgrade process is not interrupted. A failed firmware upgrade can render the player unusable.


Release Notes:


This release is for the OPPO BDP-103 and BDP-105 Blu-ray Disc players.

Special Notice:

    1. Once this firmware version is installed on the player, you will not be able to revert back to any previous official or public beta firmware. There will be no problem upgrading to any future official or beta firmware release.
    2. Due to the extensive changes in this major firmware update, it is required that the user performs a "Reset Factory Defaults" operation after the firmware is installed. Please write down your special settings before doing this, and remember to re-apply your settings and adjust the proper volume level (if applicable) before you play any content. You may experience stability issues if this step is not performed.

Note that as these updates are not region specific, some apps may not be suitable to function on Australian BDP-9XAU Players.

Comparing to version BDP10X-52-0522B, the major changes included in this version are:

    1. Resolved an issue where the player would slow down, and sometimes freeze entirely, when navigating files on USB connected hard drives. Several customers have reported this issue with their Western Digital external hard drives, and they had to power down the player then power it back on to restore its performance. This issue has been resolved.
    2. Resolved an issue where a loud popping noise could be heard at the end of playing some WAV, MP3, and DSD music tracks.
    3. Resolved an issue where accepting a cable television signal through the HDMI inputs might result in a black screen. Customers reported that if they kept changing the TV channels using the cable remote, sometimes they would only see a black screen on the TV, even though the audio was still ok. In order to restore the video, they had to force a HDMI handshake (changing the input source, hot-plug the HDMI cable, etc.).
    4. Resolved a compatibility issue with certain DSD files.
    5. Added support for the ALAC (Apple Lossless Audio Codec) audio format.
    6. Added support for briefly displaying the current audio information on the player's front panel when switching audio tracks. The audio information is displayed as "Language, Sample rate, Number of channels", such as "ENG 192/5.1". If no language information is available, it will be displayed as "AUD, Sample rate, Number of channels".
    7. Added support for directly switching the input source by pressing the INPUT button followed by a numerical button, e.g., "1" for BLU-RAY PLAYER, "2" for HDMI/MHL-IN FRONT, etc.
    8. General disc compatibility improvements based on recent and upcoming Blu-ray releases as well as user-submitted disc samples.

All features and improvements of the previous firmware are also included in this version.

 

Firmware Upgrade Instructions:

Firmware Upgrade via the Internet

    1. Turn on your TV display and the OPPO player. Eject the disc tray from the OPPO player and remove any disc. Make sure that the player is connected to the internet and the player is not playing any content.
    2. Press the SETUP button on the remote control to enter the setup menu. Select Device SetupFirmware Upgrade, and then Via Network.
    3. The player will start searching for the new firmware from an OPPO firmware server. Please follow the on-screen instructions to complete the firmware upgrade process. Use the remote control to respond to on-screen prompts. Do not use the front panel buttons because the front panel buttons will stop working during the upgrade process.
    4. DO NOT ATTEMPT TO TURN OFF THE PLAYER, UNPLUG THE POWER, OR PRESS ANY BUTTONS OTHER THAN NECESSARY TO RESPOND TO THE ON-SCREEN PROMPT DURING THE REMAINING UPGRADE PROCESS.
    5. In order to complete the firmware upgrade process, the player will turn off automatically.
    6. Turn on the player again, a new on-screen prompt of "Reset Factory Defaults" will show. It is optional but recommended to reset the player settings by selecting "Reset Factory Defaults".
    7. Repeat from Step 2 above until the player reports that it already has the latest version. This will ensure that the player downloads and installs all parts of the firmware update.
    8. Check the new firmware version by going to the setup menu, and then selecting Device Setup - Firmware Information.
    9. Enter your customized settings as necessary.
    10. Congratulations! You have just completed the firmware upgrade.

     

Firmware Upgrade via a USB Thumb Drive

    1. Click here to download the BIN file for firmware version: BDP10X-58-0719.
    2. Insert a USB thumb drive to the computer that stores the downloaded BDP10X.bin file. (The USB drive must be in FAT or FAT32 format, not NTFS. If you are not sure, just use a new USB drive that is 2GB or smaller since small drives are usually factory-formatted in FAT/FAT32.) Verify that the BIN file is in the root/main directory of the USB drive, not contained within any other folder.
    3. Remove the USB drive from the computer.
    4. Turn on your TV display and the OPPO player. Eject the disc tray from the OPPO player and remove any disc. Make sure that there is no other USB drive connected to the player.
    5. Insert the USB drive containing the firmware file to a USB port on the player's front or back panel.
    6. The player usually can recognize the firmware file and prompt you for firmware upgrade. In case the player does not prompt you, press the SETUP button on the remote control to enter the setup menu. Select Device SetupFirmware Upgrade, and then Via USB.
    7. Please follow the on-screen instructions to complete the firmware upgrade process. Use the remote control to respond to on-screen prompts. Do not use the front panel buttons because the front panel buttons will stop working during the upgrade process.
    8. DO NOT ATTEMPT TO TURN OFF THE PLAYER, UNPLUG THE POWER, OR PRESS ANY BUTTONS OTHER THAN NECESSARY TO RESPOND TO THE ON-SCREEN PROMPT DURING THE REMAINING UPGRADE PROCESS.
    9. In order to complete the firmware upgrade process, the player will turn off automatically. Unplug the USB drive after the player turns itself off.
    10. Turn on the player again, a new on-screen prompt of "Reset Factory Defaults" will show. It is optional but recommended to reset the player settings by selecting "Reset Factory Defaults".
    11. Check the new firmware version by going to the setup menu, and then selecting Device Setup - Firmware Information. If you notice that the firmware versions displayed do not match the versions listed in this release note, please contact us to obtain the firmware files that are missing from a previous update.
    12. Enter your customized settings as necessary.
    13. Congratulations! You have just completed the firmware upgrade. Erase or discard the firmware file so you do not accidentally install the firmware again.

 

Firmware Upgrade via CD

    1. If you requested a firmware CD from OPPO customer service, jump to step 5 of this procedure. You may also follow steps 2 - 4 to burn a firmware CD. (For Mac OS X users, a special CD burning tutorial is available here.)
    2. Click here to download the firmware CD image file BDP10X-58-0719-CD-Image.iso
    3. Use your favourite CD/DVD burning software to burn a firmware disc from the downloaded CD image file. While doing this, make sure you are not creating a new data disc, but burning from the already-created ISO CD image. Please consult your CD burning software's help/instruction manual for more information on how to do this. Some general instruction for common CD burning software is listed below.
    4. After the disc is burned, verify on the computer that the disc now contains a BDP10X.bin file.
    5. Turn on your TV display and the OPPO player. Make sure that the player is not playing any content.
    6. Eject the disc tray, put in the firmware disc, and then close the tray. The player usually can recognize the firmware disc and prompt you for firmware upgrade. In case the player does not prompt you, press the SETUP button on the remote control to enter the setup menu. Select Device SetupFirmware Upgrade, and then Via Disc.
    7. Please follow the on-screen instructions to complete the firmware upgrade process. Use the remote control to respond to on-screen prompts. Do not use the front panel buttons because the front panel buttons will stop working during the upgrade process.
    8. DO NOT ATTEMPT TO OPEN THE DISC TRAY, TURN OFF THE PLAYER, UNPLUG THE POWER, OR PRESS ANY BUTTONS OTHER THAN NECESSARY TO RESPOND TO THE ON-SCREEN PROMPT DURING THE REMAINING UPGRADE PROCESS.
    9. Remove the disc from the tray when the tray ejects out. In order to complete the firmware upgrade process, the player will turn off automatically. In case the player retracts the tray and turns off before you remove the firmware disc, press the OPEN/CLOSE button on the front panel. The player will turn on and the tray will eject. Remove the disc at this time.
    10. Turn on the player again, a new on-screen prompt of "Reset Factory Defaults" will show. It is optional but recommended to reset the player settings by selecting "Reset Factory Defaults".
    11. Check the new firmware version by going to the setup menu, and then selecting Device Setup - Firmware Information. If you notice that the firmware versions displayed do not match the versions listed in this release note, please contact us to obtain the firmware files that are missing from a previous update.
    12. Enter your customized settings as necessary.
    13. Congratulations! You have just completed the firmware upgrade. Erase or discard the firmware disc so you do not accidentally install the firmware again.

     

General instructions on working with ISO image files

Note: These are general instructions on how to burn the firmware CD with common CD burning software. Please consult your CD burning software's help/instruction manual for more detail.

  • In Nero Burning Rom version 6 or above , go to the 'Recorder > Burn Image' menu and select the ISO image you downloaded.
  • In Nero Burning ROM version 5 or earlier, just go to Nero Burning ROMs 'File > Burn Image' option and select the ISO image you downloaded.
  • In Nero Express select the option for 'Disc Image or Saved Project' to select the ISO image file you downloaded and burn to CD.
  • In Easy CD Creator , go to 'File > Record CD from CD Image' and select the ISO image you downloaded.
  • In Power2Go , go to 'Burning > Burn Disc Image' and select the ISO image you downloaded.
  • In ImgBurn, go to 'Write image file to disc' and select the ISO image you downloaded.
  • In burnatonce, go to 'File > Load New Image...' and select the ISO image you downloaded. Click the "Write" button to burn the CD.